Wed. Nov 30th, 2022

I hope this guide will help you when you see the Laserjet 41.2 error.

Repair your computer now.

  • 1. Download and install ASR Pro
  • 2. Open ASR Pro and click the "Scan" button
  • 3. Click the "Restore" button to start the restoration process
  • Fix your slow PC now with this free download.

    Arcing in the toner/transfer area can also be caused by an incorrect toner cartridge, a bad high voltage or ground connection to the toner cartridge or transfer roller, or a faulty high voltage power supply.

    I’m happy to report that the 28 month old Laserjet 4 printer works like new. It really wasn’t that decent since I was a newbie. I bought it last year 1992. It has always been used for individuals, individuals and small businesses on the Internet and has nearly 44,000 WWW pages printed at present. For various reasons, over the past 5 years, I have generally replaced the transfer and pickup rollers and of course the toner cartridges.

    I’m interacting with the community to understand what I’ve done. Perhaps it will benefit others. Special thanks to Repaiatrooper for responding to your situation in this way.

    I first got a 41.2 unshakable error. When using the cheaper paper cassette, one page of the blog will be printed and the second page will appear as a 3/4 to 1 inch black bar.Lower part of the page. For some reason, I was able to help you print two pages from the MP tray. I just tried it right away and printed the second side without the black line. Looking back, I can’t explain it. The roll holder of the cassette compartment was replaced less than 2 years ago, so the paper was transferred safely. I thought deep cleaning change might be a problem. Good and bad.

    After upgrading, remove the top and sides, open the cover and blow with air, clean the existing rollers with alcohol, and reassemble the printer. I have no printing and error 51.

    Some on the internet say you need to replace the scanner to get this method to fail, some say you can clean it. I chose something else. I disassembled the handle again, but this time I removed the exhaust system, took out the scanner, opened the block and lightly wiped the mirrors. After a deep cleaning with alcohol, I ran the assembled printer, self test and PCL font list. amazing god. I actually have a new silent printer.

    Why a 29 year old printer? This and its immediate successorsCheeks were the Best HP recipe. They were modular, easy to maintain, with a metal case, ready to go (probably too long for HP), still supported by third party and non-HP parts, and could be used when maintenance was neat and clean.

    5Si/8000pcsDiagram 1 graphic couple Management

    Error 41.2 on LaserJet 5Si, 8000, 8100, and 8150 printers is typically due to: A high voltage arc affecting the beam detection circuitry. The most common cause of an arc is a poor connection to the roller conveyor. Other possibilities are indicated in the margins of the article.

    Left Connection: Leaf Spring

    The transfer roller has two electrical connectors, one at almost each end, and both are a bit dangerous. The left connector is a leaf spring that makes direct contact with the special metal shaft of the transfer drum. If it is bent, also fold it back or replace the whole device.feeder. Note that printers must operate without a leaf spring powered by ground. However, a bad network can cause electrical arcs.

    Correct Connection: Coil Spring

    41.2 error laserjet

    The right connector is a coil spring that connects high voltage to the straight end of the transfer roller shaft. Each end of this spring is put on a plastic knot. If the spring is simply not positioned correctly, remove the bushing (spread each plastic bracket slightly to the sides and push the bushing up) and reposition the spring.

    Other Options

    Repair your computer now.

    Looking for a powerful and reliable PC repair tool? Look no further than ASR Pro! This application will quickly detect and fix common Windows errors, protect you from data loss, malware and hardware failure, and optimize your system for maximum performance. So don't struggle with a faulty computer - download ASR Pro today!

  • 1. Download and install ASR Pro
  • 2. Open ASR Pro and click the "Scan" button
  • 3. Click the "Restore" button to start the restoration process

  • A faulty toner cartridge, power supply or high voltage power supply, or any other bad connection between them, can also cause sparking. Finally, it is possible, although unlikely, that an imperfect laser scanner or DC controller can cause error 41.2.

    41.2 error laserjet

    Error 41.2 for the LaserJet 5Si, 8000, 8100, and 8150 is typically caused by high voltage arcs that interfere with the ripple detection circuitry. The most frequent resultArcing is a bad connection with roll transfer. Other possibilities are discussed at the end of the article.

    Left Connection: Leaf Spring

    All transfer rollers have two electrical connections, one for each sequence, and both are easily damaged. The left connector is a plate-shaped copper spring that makes direct contact with the heavy metal shaft of the transfer roller. If it is bent, bend it first or replace the whole feeder. Please note that the printer should definitely work without this leaf spring, which seems to be its main mass. However, poor contact will cause an electric arc.

    Fix your slow PC now with this free download.

    Il Modo Migliore Per Correggere L’errore Laserjet 41.2
    Beste Manier Om Laserjet-fout 41.2 Op Te Lossen
    A Melhor Maneira De Corrigir O Erro Laserjet 41.2
    Laserjet Blunder 41.2를 수정하는 가장 좋은 방법
    El Mejor Viaje Para Corregir El Error 41.2 De Laserjet
    Лучший способ исправить ошибку Laserjet 41.2
    Bästa Sättet Att Fixa Laserjet Error 41.2
    Najlepszy Sposób Na Dołączenie Błędu Laserjet 41,2
    Beste Methode Zur Behebung Des Laserjet-Fehlers 41.2
    Meilleur Moyen De Voir L’erreur Laserjet 41.2